Restorers 3/4 Inch 331 Trapezoid Wood Veneer Tambour Panel

This is an oversized item. An additional $100.00 for up to 2 panels will be calculated in shipping charges at checkout.

Update tambour door style furniture with Restorers 3/4 Inch 331 Trapezoid Wood Veneer Tambour Panel. Available in 6 wood types. This tambour is intended for interior applications and is to be bonded to any clean, dry, structurally sound and rigid surface either horizontal, diagonal, or vertical.

Each panel should be stretched by rolling the panel up with slats facing inward as well as bending concave carefully. This spreads each tambour slat out and spaces them evenly allowing for expansion and contraction. As soon as the panels arrive, they must be in a controlled environment (temperature and humidity) ranging from 50 - 80 degrees Fahrenheit. The humidity levels must not fall below 30% and not go above 50% for an extended period.

Since this is real wood it will expand and contract regularly. If painting, staining, or coating, it is extremely important to stretch the material (as mentioned above) to allow for expansion with moisture prior to coating. The material must be acclimated for a minimum of 48 hours prior to finishing. Panels are then typically glued up with a standard paneling/construction adhesive (trowel or caulk style) onto a solid substrate. Thicker profiles should additionally either be held with finishing nails or braced in place until the glue cures.

The thickness of the tambour varies depending on the profile chosen. It is recommended that both the solid wood and veneers be finished with either a stain and a clear coat polyurethane finish, a clear coat, natural oil moisturizer, or painted to increase durability and life.

Panels are nominal in size and are not finish cut to exact lengths, however no slats will be shorter than noted. Each panel is hand-laid and assembled, sorting and matching color to the natural color variation of the wood chosen. Only the highest quality slats are used and placed on a flexible backing with a permanent pressure sensitive adhesive.

Please note: This is a real natural wood product and will have color and grain variation from slat to slat and panel to panel. While they are hand assembled and color sorted, a reasonable color variation should be expected depending on the wood species. The grain and/or color will never be 100% consistent from slat to slat or panel to panel.